could you please also send me your /usr/home/funzoneq/MonetDB-4.9.3/src/modules/plain/alarm.glue.c, or at least a couple of lines around line 185?
thanks,
Stefan
On Thu, Jan 19, 2006 at 11:28:16PM +0100, Stefan Manegold wrote:
Arnoud,
which version of gcc are you using?
`gcc --version`
Stefan
On Thu, Jan 19, 2006 at 10:57:58PM +0100, Arnoud Vermeer wrote:
Hi Stefan,
In the new version, I've got a new error. The gmake command lasts longer though, so I guess the previous problem was fixed in the newer version.
This is the current error I get at a standard ./configure && gmake
/bin/sh ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I. -I../../common -I../../gdk -I../../monet -DLIBALARM -g -O2 -std=c99 -Wall -W -fno-strict-aliasing -Werror-implicit-function-declaration -Werror -Wno-unused-function -Wno-unused-label -D_REENTRANT -c -o lib_alarm_la-alarm.glue.lo `test -f ' alarm.glue.c' || echo './'`alarm.glue.c gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I. -I../../common -I../../gdk -I../../monet -DLIBALARM -g -O2 -std=c99 -Wall -W -fno-strict-aliasing -Werror-implicit-function-declaration -Werror -Wno-unused-function -Wno-unused-label -D_REENTRANT -c alarm.glue.c -fPIC -DPIC -o .libs/lib_alarm_la-alarm.glue.o alarm.glue.c: In function `CMDctime_unpack559103634': alarm.glue.c:185: warning: assignment discards qualifiers from pointer target type gmake[4]: *** [lib_alarm_la-alarm.glue.lo] Error 1 gmake[4]: Leaving directory `/usr/home/funzoneq/MonetDB-4.9.3 /src/modules/plain' gmake[3]: *** [check] Error 2 gmake[3]: Leaving directory `/usr/home/funzoneq/MonetDB-4.9.3 /src/modules/plain' gmake[2]: *** [check-recursive] Error 1 gmake[2]: Leaving directory `/usr/home/funzoneq/MonetDB-4.9.3/src/modules' gmake[1]: *** [check-recursive] Error 1 gmake[1]: Leaving directory `/usr/home/funzoneq/MonetDB-4.9.3/src' gmake: *** [check-recursive] Error 1
I also get a lot of overrides from rpm.mk, but that doesn't concern me that much hence FreeBSD doesn't know rpm's. It seems the new error is located in alarm.glue.c. Although I have had a small bit of experience with C++ programming (first year student Information Sciences at Windesheim College, Zwolle, The Netherlands), I don't have a clue what the error means.
Do you have any clue?
Thanks,
Arnoud Vermeer
On 1/19/06, Stefan Manegold Stefan.Manegold@cwi.nl wrote:
configure: WARNING: sys/file.h: present but cannot be compiled configure: WARNING: sys/file.h: check for missing prerequisite
headers?
configure: WARNING: sys/file.h: see the Autoconf documentation configure: WARNING: sys/file.h: section "Present But Cannot Be
Compiled"
configure: WARNING: sys/file.h: proceeding with the preprocessor's
result
configure: WARNING: sys/file.h: in the future, the compiler will
take
precedence configure: WARNING: ##
------------------------------------------ ##
configure: WARNING: ## Report this to the AC_PACKAGE_NAME
lists. ##
configure: WARNING: ##
------------------------------------------ ##
are these the only error messages you get from configure?
yes, I've seen them before at other compiles to. Does compile most of
the
time, inspite of the error.
yes. I actually don't think that these are the reason for the errors you get.
first was, that MonetDB requires GNU make instead of BSD make. That's solved.
The gmake fails: standard ./configure (same output as in earlier posted version) gmake > gmake.txt gmake console output > gmake_console.txt
Adding --enable-bits=64 to the ./configure doesn't change the output.
http://www.freshway.biz/files/MonetDB-gmake.txt http://www.freshway.biz/files/MonetDB-gmake_console.txt
Any ideas?
not really.
I'm a bit scared by all the "overriding commands for target" messages, but the real problems seems to be this: ======= In file included from stream.mx:264: /usr/include/netinet/ip.h:49: error: syntax error before "u_int" /usr/include/netinet/ip.h:148: error: syntax error before "u_char" /usr/include/netinet/ip.h:200: error: syntax error before "u_char" stream.mx: In function ocket_open': stream.mx:1198: error: P_TOS' undeclared (first use in this function) stream.mx:1198: error: (Each undeclared identifier is reported only once stream.mx:1198: error: for each function it appears in.) gmake[4]: *** [libstream_la-stream.lo] Error 1 gmake[3]: *** [all] Error 2 gmake[2]: *** [all-recursive] Error 1 gmake[1]: *** [all-recursive] Error 1 gmake: *** [all] Error 2 ========
I recall that there were some changes/fixes related to FreeBSD, which might not be in the release tarball ("MonetDB-4.8.2.tar.gz").
But we are about to release MonetDB 4.10 on Monday; hence, could you download the latest release candidate " MonetDB-4.9.3.tar.gz" from http://monetdb.cwi.nl/testing/projects/monetdb/Current/.DailyBuilds./SourceT... and check whether this works (better)?
Stefan
Greetings,
Arnoud Vermeer FreshWay Innovations
-- | Dr. Stefan Manegold | mailto:Stefan.Manegold@cwi.nl | | CWI, P.O.Box 94079 | http://www.cwi.nl/~manegold/ | | 1090 GB Amsterdam | Tel.: +31 (20) 592-4212 | | The Netherlands | Fax : +31 (20) 592-4312 |
-- | Dr. Stefan Manegold | mailto:Stefan.Manegold@cwi.nl | | CWI, P.O.Box 94079 | http://www.cwi.nl/~manegold/ | | 1090 GB Amsterdam | Tel.: +31 (20) 592-4212 | | The Netherlands | Fax : +31 (20) 592-4312 |
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid%103432&bid#0486&dat%... _______________________________________________ Monetdb-developers mailing list Monetdb-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/monetdb-developers